Used Equipment
Industrial Washers
Powder Coating
Industrial Ovens
|
All used equipment we currently have for sale
is listed below.
Click on the photo (if available) to view a larger version.
| Item |
Price |
| E-Coat Systems |
 |
PAL Cathodic E-coat Overhead Rack-Hoist System
see picture / specs
|
Contact Us |
| Industrial Ovens |
 |
DriQuik Gas Infrared Oven
Specifications:
480 VAC, 3 PH, 60HZ
BTU’S 450,000
FULL LOAD CURRENT: 28.2AMPS 15KW
DISCONNECT RATING: 60AMPS
EQUIPMENT MODEL: #12-CG15X60
SERIAL# 9125-497
DATE OF MANUFACTURE: 4/97
• GAS CATALYTIC VERTICAL OVEN---three CG15-60 DriQuik industrial sections high by two CG15-60 DriQuik industrial sections long. 9’ long pallet tray load section, 10’ long oven, 9’ discharge section.
• EXTERIOR: 1-5/8” x 1-5/8” 12 gauge Unistrut structural steel finished in green hybrid powder coat.
• CATALYTIC BURNERS are approved by Factory Mutual for use in Class 1, Division 2, Group hazardous areas, and the Canadian Gas Association (CGA) has approved usage in Class 1, Division 1 and 2, Group D hazardous areas.
• POWDERED CONVEYOR through oven (12 fpm) with overhead door at the entrance to the oven chamber and vinyl strip curtain at the discharge end. Conveyor is designed for pallet loads on metal trays (3 trays with unit). Three pallet trays, 28’ long triple chain conveyor.
• OVEN RECIRCULATED AIR SYSTEM: One variable speed 12 in. dia. paddle type plug fan rated at 2000 to 6000 cfm and ½ in. static pressure. Blower system contains 5hp premium efficiency motor with hi-temp capability. A VFD controller is located in the control cabinet.
• OVEN CONTROL SYSTEM: One NEMA 12 rated CSA Approved oven control cabinet, designed for floor mounting. Control cabinet contains the necessary 30 amp main disconnect switch, contactors, fuse blocks, transformer, and motor starters for proper oven control. An Allen Bradley SLC 5/01PLC diagnostic control system will automatically control all startup and safety features, as well as control the two separate temperature control zones.
|
contact us |
 |
Many Ovens
There are approximately 10 ovens in this facility. Most ovens are 6" oven panels that are in excellent condition. Many many burner boxes that are equipped with Maxon oven packs. Thousands of feet of duct work. Finishing Machine can sell the ovens where-is, as-is, re-engineered to fit your specific needs, or any combination. This is an opportunity to get a first class oven at an extreme discount.
|
Contact Us |
| Industrial Washers |
 |
Washer
SVS 3-STAGE PARTS WASHER, 48” W STAINLESS STEEL MESH CONVEYOR BELT, OPENING 48” W X 18” H, 45’ LONG TUNNEL.
|
contact us |
 |
Two Stage Wash System
100% Stainless Steel construction. The two stage wash system includes two wash booths and two storage tanks made of stainless steel construction. Each booth has 96 nozzles for complete coverage. The dimensions for the tanks and booths are:
Booths: 111" tall x 66" wide x 72" length
Tanks: 782 imperial gallons
One tank has a heat exchanger to bring the chemicals up to temperature. 2 million BTU Natural gas fired. It has an Eclipse burner with an Alison ignition system. Brook & Hanson high efficiency pumps, one exhaust fan. The wash system is controlled by touch screen display which can be run manually or automatically. A few miscellaneous items are included.
|
contact us |
 |
Three Stage Washer
1. The over all length is approx. 30 ft long, by 8 ft wide.
2. The part opening is 3' x 5' (could be opened to 6' high)
3. The upper shroud and drain pans are stainless steel
4. The tanks are carbon steel
5. The line speed is 5-6 fpm
6 Stage #1 is 10 ft. long (11 risers), 15 HP pump 330 GPM, 2 million BTU Maxon "Tubo Therm" burner with 6" burner tube.
7 Stages 2 & 3 are 3 ft long (4 risers ea.) 5 HP pumps 186 GPM, ambient
8. Two, 18" exhaust fans
9 Upper shroud split top with brush seal (conveyor runs above the washer out of the spray)
10 Approximate age 8 yrs only used lightly for 5 years.
|
Contact Us |
| Other |
 |
Complete DI system
DI system with stainless steel membrane housings, completely intact. Will flow in excess of 20 gpm.
|
contact us |
| |
1500 feet of X458 Short-drop Conveyor
With drive, wheel turns, elevation changes, etc. We also have 1500 feet of long-drop chain with one drive unit, elevation changes, and wheel turns. All equipment in excellent condition.
|
Contact Us |
| |
Burners and Gas Trains
We have available several Maxon oven packs and Eclipse burners for ovens of different sizes. They all have IRI coded gas trains and are ready to go to work.
|
Contact Us |
 |
Wastewater Treatment System
Finishing Machine has a wastewater treatment system with a flow rate of 100 gallons per minute. It is complete and ready for removal. See the pictures to look at this unit. It is a complete unit with a clarifier, all pumps and electrical controls, filter press, holding tanks, etc. For more pictures, click on the picture to the left.
|
Contact us |
 |
Drag-through type conveyor
Set up for approximately 10 feet per minute. This unit has a work opening of 8' wide by 66" tall. The overall height of the unit is 13'6". The conveyor is a Unibilt inverted power and free. There are several stainless steel filters that go with this unit. Stage one is 11' long, stage two is 8'4" long, stage three is 6'10" long, stage four is 4' long, stage five is 4' long, and stage 5 1/2 is a three foot RO stage with a 25' long exit vestibule. Three stages are heated with Maxon Tube-o-Flame burners. This unit is complete. This unit can be easily modified to a monorail.
|
Contact Us |
 |
Conveyor Systems
There are literally thousands and thousands of feet of Unibilt conveyor. Both inverted power and free, straight-powered conveyor, and overhead power and free. Thousands of bucks for carrying parts, along with trolleys, and carriers for power and free. All the conveyor in this plant appears to be like new.
|
Contact Us |
| |
Miscellaneous Electrical items and controls
Electrical items for control panels, Honey-well Controls, High Limits, Fuse blocks, starters, timers, etc.. Like New!
|
Contact us |
| |
Air Make-Ups
We have many air make-ups available, ranging from 8,000 to 50,000 cfm.
|
contact us |
| Painting Systems |
 |
Complete System
Finishing Machine has been asked by one of their good customers to liquidate a complete system, or any part of that system at our earliest possible convenience. The system consists of a three stage all stainless steel washer, dry-off oven, wet spray system, curing oven, and conveyor. Enclosed are some pictures and drawings of this system. If you would like to see the system, the washer, or oven, please call us at your earliest convenience and we will make arrangements to show you the system.
|
contact us |
| Powder Coating Systems |
 |
Chain on Edge Powder Machines
Chain on edge powder machines have just become available.
First is a 1998, Nordson 504-COE, Guns 3 model APG2000, exhaust fan 152 fpm, fire detection sensor. Oven=2700 spindles, chain 900 ft., natural gas 1-5 psig, 1600 scfh @ 1000 btu / scf, 1,600,000 btuh, max temp 600 F. Recir 25,000 cfm, exhaust 1202 cfm @ 1.5 hp.
Second is 1997 Brinks Booth, Guns 3 Model APG2000, exhaust fan 152 fpm, fire detection sensor, oven = 2700 spindles, chain 900 ft., natural gas 1-5 psig, 1600 scfh @ 1000 btu / scf, 1,600,000 btuh, max temp 600 F. Recir 25,000 cfm, exhaust 1202 cfm @ 1.5 hp.
Third is a powder coat system with one booth and two ovens. 1999. Brinks Booth, Guns 4 Model APG2000, Exhaust fan 150 fpm, fire detection center. Oven = Natural gas 1-5 psig, 1600 scfh @ 1000 btu / scf, 1,600,000 btuh, max temp 600F. Recir 25,000 CFM, Exhaust 1201 CFM @ 1.5 hp. Chain #1 = 2550 spindles and 800 ft. Chain #2 = 2500 spindles and 800 ft.
Should have pictures soon.
|
contact us |
 |
Two Nordson Powder Booths
We have two booths, both are the Nordson 2000. Both booths are manual
spray gun but can be change to automatic spray guns. Both units are complete.
The openings are 6' 3'' tall by 4'wide. The opening starts at 27'' off finish floor. The gun opening are 5' by 291/2'' and a door that closes to make it 3' by 291/2''.
The booths have one roll away color module and feeder and the whole thing rolls on and off line by track and wheels.
There will be two guns per booth, some gun spare parts, two gun controllers, two spray booth platform that can be rolled back and 4 or 5 filters. We have a spare motor that will go with the first booth that is purchased. If you have any more questions please contact us.
|
$55,000 each |
 |
Powder Booth
Nordson 3 x 5 work opening, approximately 20 feet long. With cartridge collection. There are no controls for this unit, but it does have an Azo seive and powder hopper.
|
$5000.00 |
|
|
